|
Technical parameters |
Value |
|
Output |
None |
|
Measured Value |
Temperature + Relative Humidity |
|
Construction Type |
With T+RH Probe on Cable |
|
Design |
Industrial |
|
Temperature Measuring Range |
-30 to 105 °C |
|
Relay Output |
Yes |
|
Two-State Input |
No |
|
Lcd Display |
Yes |
|
PoE |
No |
|
Maximum switching voltage, current, power of relay output |
50V, 2A, 60VA |
|
Audible alarm |
from built-in beeper - switchable |
|
Relative humidity range |
0 to 100% |
|
Accuracy of relative humidity measurement |
±2.5% relative humidity from 5 to 95% at 23°C |
|
Accuracy of temperature output |
±0.4°C from -30 to +100°C
±0.4% from reading over +100°C |
|
Available temperature units |
degrees Celsius, Fahrenheit |
|
Accuracy and range of dew point temperature output - for more details see graphs |
±1.5°C at ambient temperature T<25°C and RH>30%
range -60 to +80 °C |
|
Accuracy and range of absolute humidity output |
±1.5g/m3 at ambient temperature T < 25°C
range 0 to 400 g/m3 |
|
Accuracy and range of specific humidity output |
±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg |
|
Accuracy and range of mixing ratio output |
±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg |
|
Accuracy and range of specific enthalpy output |
±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg |
|
Temperature operating range |
-30 to +80°C |
|
Temperature operating range of LCD display |
readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C |
|
Temperature compensation of the humidity sensor |
all temperature range |
|
Filtering ability of sensor cover |
0.025mm - filter with stainless steel mesh |
|
IP protection |
IP65 electronics, IP40 sensors |
|
Power |
9-30Vdc, power consumption approximately 1W |
|
Length of the probe cable |
1m, 2m or 4m optionally |
|
Dimensions |
136 x 159 x 45 mm (W x H x D), probe length 88 mm, probe diameter 18mm |
|
Weight |
approximately 400g - 1m probe |
