|
Technical parameters |
Value |
|
Output |
Ethernet |
|
Measured Value |
Temperature |
|
Construction Type |
For External Temperature Probe Pt1000 |
|
Design |
Rack 19'' |
|
Temperature Measuring Range |
-200 to 600 °C |
|
Relay Output |
Yes |
|
Two-State Input |
Yes |
|
Lcd Display |
Yes |
|
PoE |
No |
|
Accuracy of temperature intput |
±0.2°C (without temperature probe) |
|
Resolution |
0.1°C |
|
Measuring interval |
2s |
|
Available temperature units |
degrees Celsius, degrees Fahrenheit |
|
Temperature operating range |
-30 to +80°C |
|
IP protection |
IP30 |
|
Number of relay outputs |
2 |
|
Maximum switching voltage, current and power of relay output |
50V, 2A, 60VA |
|
Number of binary inputs |
3 |
|
Signal for binary inputs |
dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated. |
|
Minimum pulse length at binary input |
500ms |
|
Low voltage level |
0 to +0.5V |
|
High voltage level |
+3.0 to +30V |
|
Audible alarm |
built-in beeper - switchable |
|
LAN connection |
RJ-45 connector, 10Base-T or 100Base-TX |
|
Communication protocols |
WWW, ModbusTCP, SNMPv1, SOAP, XML |
|
Alarm protocols |
E-mail (SMTP authentication is supported), SNMP Trap, Syslog |
|
Configuration |
WWW interface, T-Sensor |
|
Temperature operating range of LCD display |
readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C |
|
Power |
12Vdc, maximum consumption 1W |
|
Power connector |
co-axial, diameter 5.5 x 2.1mm |
|
Probe type |
Pt1000/3850, shielded cable maximul length 10m |
|
Dimensions |
483 x 44 x 45mm (W x H x D), one 19'' rack unit 1U |
|
Weight |
approximately 1025g |
